Download new firmware de cisco spa112.
(10[1-5]|11[2-3]xx|21930xxxxx|<*:15>xxxxxx.|<#:17>xxxxxx.|1[3-7]xxxxxx.|[2-8]xxxxxx|9xxxxxxxx|0[4-8][1-7][2-8]xxxxx|00[1-9]xxxxxxxx.)
(10[1-5]|11[2-3]xx|21930xxxxx|<*:15>xxxxxx.|<#:17>xxxxxx.|1[3-7]xxxxxx.|[2-8]xxxxx|9xxxxxxxx|01[2-8]xxxxxx|0[4-8][1-7][2-8]xxxxx|00[1-9]xxxxxxxx.)
Other Options:
Regional -> Call progress tones -> Dial tone: 440@-19,440@-19;20(*/0/1+2). In this line the number 20 es the number of seconds to wait between digits marked.
Regional -> Control Timer Values (Sec) -> Interdigit Long Timer: 20
Regional -> Control Timer Values (Sec) -> Hook Flash Timer Max: .1
{11[2-3]xx|<*=15>xxxxxx+|<#=17>xxxxxx+|1[3-7]xxxxxx+|[2-8]xxxxxx|9xxxxxxxx|0[4-8][1-7][2-8]xxxxx|0[4-8][1-7]9xxxxxxxx|00[1-9]xxxxxxxx+}
{11[2-3]xx|<*=15>xxxxxx+|<#=17>xxxxxx+|1[3-7]xxxxxx+|[2-8]xxxxx|9xxxxxxxx|01[2-8]xxxxxx|019xxxxxxxx|0[4-8][1-7][2-8]xxxxx|0[4-8][1-7]9xxxxxxxx|00[1-9]xxxxxxxx+}
eanble web access to WAN
plug a phone into phone 1, mark *** (a voice is heard).
Mark 12 (a voice is heard).
mark 9 to enable.
then hang.
Poner en FXS PORT 1 y FXS PORT 2:
Enable Call Features: No
Use # as Dial Key: No
Grandstream HT502 con telefono monedero
Configurar en cada linea lo siguiente:
No Key Entry Timeout: 15
Loop Current Disconnect: No
Firmware update
Goto grandstream page grandstrem support search firmware and copy url into configuration.
Dialplan PBX Lima
{<=111_PBX_NUM_>[1-8]xx|<9=01>[2-8]xxxxxx|<9=>9xxxxxxxx|<9=>0[4-8][1-7][2-8]xxxxx|<9=>00[1-9]xxxxxxxx+}
Download file configuration.
11>#t8.r2t2-|[2_7]>#t8.r5t9|9>#t8.r7t9|0>#t8[4_8][1_7][2_7].r4t9|8>#t8.r5t9-|0>#t8[4_8][1_7]8.r4t9-|10[1_5]>#t8.r6t9-|00>#t8.r9t9-
11>#t8.r2t2-|[2_7]>#t8.r4t9|9>#t8.r7t9|0>#t81[2_7].r5t9|0>#t8[4_8][1_7][2_7].r4t9|0>#t8[4_8][1_7]9.r5t9|8>#t8.r4t2-|0>#t818.r5t9-|0>#t8[4_8][1_7]8.r4t9-|10[1_5]>#t8.r6t2-|00>#t8.r9t9-
